icon

MEYLE Displays and Converter

gesamtuebersicht-anzeigen-und-messwandler-1.png

Signal converters with extremely short conversion times, high frequency range and easy signal adaptation. Digital displays with short response time, precision and flexible configuration of the operating mode.

DEAX11564 – Display

display.png

Process Indicator with 2 Analogue Inputs, 2 Presets, Relay Outputs and Serial RS232 / RS485 Interface

  • Two analogue inputs with independentscaling, each +/- 10 V or 0/4 – 20 mA
  • Operating modes for display of input A or input B or the combinations [A + B], [A - B], [A x B] and [A : B]
  • Useful supplementary functions like Tare function, programmable averaging functions, programmable linearization etc.
  • Aux. output 24 V DC / 100 mA for sensor supply

Technical Specifications

Power supply DC: 24 V (17 - 30 V), approx. 100 mA (without aux. sensor supply)

DC current consumption (without sensors) : 18 V : 110 mA, 24 V : 90 mA, 30 V : 80 mA

Aux. output for sensors: 24 V DC, +/- 15%, 100 mA

Inputs: 2 analogue inputs (+/-10 V, 0 ... +20 mA, 4 ... +20 mA)

Input impedance: Current: Ri = 100 Ohms, Voltage: Ri = 30 kOhms

Resolution: 14 bits (13 bits + sign)

Accuracy: +/- 0.1%, +/- 1 digit

Relay outputs: 2 relays (dry change-over each), 250 VAC / 1 A / 250 VA or 100 VDC / 1 A / 100 W

Serial interface: RS 232 / RS 485, 600 (selectable) - 38 400 bauds

Ambient temperature: Operation: 0° - 45° ( 32 - 113°F), Storage: -25° - +70° (-13 - 158°F)

Housing: Norly UL94 - V-0

Display: 6 decades LED, high-efficiency orange, 15 mm (0.590")

Protection class: IP65 (front), IP20 (rear)

Screw terminals: Signal lines max. 1.5 mm² (.0023 sq in), Relays max. 2.5 mm² (.0039 sq in)

Minimum update time: 50 msec (display): 60 msec (switching outputs)

Weight: approx. 250 g (8.9 oz)

Conformity and standards: EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3; LV 2006/95/EC: EN 61010-1

DEAX13567-70 – Display

display-deax13567.png

Process Indicators with Two Analogue Inputs and Calculations

  • Two analogue inputs with independentscaling, each +/- 10 V or 0/4 – 20 mA
  • Operating modes for display of input A or input B or the combinations A + B, A - B, A x B and A : B
  • Useful supplementary functions like Tare function, programmable averaging functions, programmable linearization etc.
  • Powersupply 115/230 VAC and 17-30 VDC in the same unit
  • Aux. output 24 V DC / 100 mA for sensor supply

 

DEAX13567: Process Indicator, Display only

DEAX13569: Process Indicator with 2 Presets and Optocoupler Outputs

DEAX13570: Process Indicator with Serial RS232 / RS485 Interface

Technical Specifications

Power supply AC: 115/230 V (+/- 12,5 %), 7,5 VA

Power supply DC: 24 V (17 - 30 V), approx. 100 mA (without aux. sensor supply)

Total AC power: 7,5 VA

DC current consumption (without sensors): 18 V : 110 mA, 24 V : 90 mA, 30 V : 80 mA

Aux. output for sensors: 24 V DC, +/- 15%, 100 mA (with AC and DC power input)

Inputs: 2 analogue inputs (+/-10 V, 0 ... +20 mA, 4 ... +20 mA)

Input impedance: Current: Ri = 100 Ohms, Voltage: Ri = 30 kOhms

Resolution: 14 bits (13 bits + sign)

Accuracy: +/- 0.1%, +/- 1 digit

Switching outputs (DEAX13569 only): 2 x PNP, max. 35 V, max. 150 mA

minimum response time 53 msec.

Serial interface (DEAX13570 only): RS 232 / RS 485, 600 - 38 400 bauds

Ambient temperature: Operation: 0° - 45° ( 32 - 113°F), Storage: -25° - +70° (-13 - 158°F)

Housing: Norly UL94 - V-0

Display: 6 decades LED, high-efficiency orange, 15 mm (0.590")

Protection class: IP65 (front), IP20 (rear)

Screw terminals: Signal lines max. 1.5 mm² (.0023 sq.in.), AC lines max. 2.5 mm² (.0039 sq.in.)

Minimum update time : 50 msec (display): 53 msec (switching outputs)

Conformity and standards : EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3; LV 2006/95/EC: EN 61010-1

DEAX13568 – Display

display-deax13568.png

Process Indicator with Two Analogue Inputs, Calculations and Programmable Analogue Output

  • Two analogue inputs with independent scaling, each +/- 10V or 0/4 – 20 mA
  • Operating modes for display of input A, input B as well as combinations [A + B], [A - B], [A x B] and [A : B]
  • Fully programmable scaling and zero definitions
  • Useful supplementary functions like Tare function, programmable averaging functions, programmable linearization etc.
  • Powersupply 115/230 VAC and 17-30 VDC in the same unit
  • Aux. output 24 VDC / 100 mA for sensor supply

Technical Specifications

Power supply AC: 115/230 V (+/- 12,5 %), 7,5 VA

Power supply DC: 24 V (17 - 30 V), approx. 100 mA (without aux. sensor supply)

Total AC power: 7,5 VA

DC current consumption (without sensors): 18 V : 110 mA, 24 V : 90 mA, 30 V : 80 mA

Aux. output for sensors: 24 V DC, +/- 15%, 100 mA (with AC and DC power input)

Inputs: 2 analogue inputs (+/-10 V, 0 ... 20 mA, 4 ... 20 mA)

Input impedance: Current: Ri = 100 Ohms, Voltage: Ri = 30 kOhms

Resolution: 14 bits (13 bits + sign)

Accuracy: +/- 0.1%, +/- 1 digit

Analogue outputs 0/4 - 20 mA (max. 270 ohms), 0 - +/-10 V (max. 2 mA)

Resolution 14 bits

Response times Display min. 50 msec.

Analogue outputs min. 58 msec.

Ambient temperature: Operation: 0° - 45° ( 32 - 113°F), Storage: -25° - +70° (-13 - 158°F)

Housing: Norly UL94 - V-0

Display: 6 decades LED, high-efficiency orange, 15 mm (0.590")

Protection class: IP65 (front), IP20 (rear)

Screw terminals: Signal lines max. 1.5 mm² (.0023 sq.in.)

AC lines max. 2.5 mm² (.0039 sq.in.)

Conformity and standards : EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3; LV2005/95/EC: EN 61010-1

DEDX13567-70 – Display

display-dedx13567.png

Universal Display Units with Impulse Inputs

Operation modes:

  • High Speed Position and Event Counter (100 kHz)
  • Tachometer, Frequency Meter
  • Baking Time and Processing Time Indicator (reciprocal speed)
  • Timer, Stopwatch
  • Speed Display from Transition Time between Start and Stop Impulse
  • Additional Functions: Linearization, Brightness Control, Digital Filter etc.

 

DEDX 13567: Display only

DEDX 13568: Display with Analogue Output

DEDX 13569: Display with Two Presets and Switching Outputs

DEDX 13570: Display with Serial Interface

Technical Specifications

Supply voltage AC: 115/230 V (+/- 12.5 %)

Consumption: 7.5 VA

Supply voltage DC: 24V (17 - 30V)

Consumption (without sensor): 18 V = 120 mA, 24 V = 95 mA, 30 V = 80 mA (approx.)

Aux. voltage for encoder supply: 24V DC, +/- 15%, 120 mA (with AC + DC supply), (5 VDC / 120 mA with option TTLIN1)

AC Power: 7.5 VA

Inputs: 3 (PNP/NPN/Namur), A/B = Impulse, C = Reset

Input currents: 5.1 mA / 24 V (Ri = 4.7 kOhms)

Input level HTL (standard): Low: 0 ... 3,5 V, High: 9 ... 30V

Input level TTL (option TTLIN1): CMOS levels, Low: 0 ... 0.8 V, High: 3.6 ... 5.0 V

Max. input frequency: All counter modes: 100 kHz

All other operating modes: 25 kHz

Reset input C: 1 kHz (min. pulse duration 500 µsec)

Display update rate: approx. 7 msec (330 msec with tachometer operation)

Accuracy (frequency measurement): +/- 1 ppm +/- 1 Digit

Analogue output (DEDX13568): Current: 0/4...20 mA (load 0 - 270 ohms)

Voltage: 0...+/- 10 V (max. 2 mA)

Resolution analogue: 14 Bits + Sign

Accuracy analogue: 0.1%

Analogue response time: see 4.3.

Ambient temperature: Operation: 0° - 45°C ( 32 - 113°F)

Storage: -25° - +70°C (-13 - 158°F)

Housing: Norly UL94 - V-0

Display: 6 Digit, LED, high- efficiency orange, 15 mm (0.59")

Protection class: Front IP65, Rear IP20

Terminals: Signals max. 1.5 mm², AC power max. 2.5 mm²

Switching outputs (DEDX13569): PNP, max. 30 volts, max. 150 mA

Weight (net) approx.: 450 g

Conformity and Standards: EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3; LV 2006/95/EC: EN 61010-1

DEIX11564 – Display

display-deix11564.png

SSI Indicator with Two Relay Outputs and Serial Interface, for Use with Single-Turn or Multi-Turn SSI Encoders

  • Clear LED display (15 mm / 0.59" size) with adjustable brightness
  • Master- or Slave operation with clock rates up to 1 MHz
  • Suitable for all SSI formats from 8 to 32 bits
  • Two presets and relay outputs
  • Serial RS232 / RS485 interface
  • Numerous supplementary functions like Linearization, Bit Blanking etc.

Technical Specifications

Supply voltage DC: 24 V (17 - 30 V)

Consumption (without sensor): 17 V: 190 mA, 24 V: 150 mA, 30 V: 120 mA

Aux. output for encoder: 24 VDC, +/- 15%, 120 mA (with AC and DC supply)

Control Inputs: 3 inputs, A, B, C (PNP/NPN/Namur)

Input currents: 5.1 mA / 24 V (Ri = 4,7 kOhm)

Input level HTL: Low: 0 ... 2 V, High: 9 ... 35 V

SSI input frequency range: 100 Hz - 1 MHz

Min. pulse duration for Reset: 5 msec

Serial interface: RS 232 or RS 485 (switch selectable), 600 ... 38400 bauds

Ambient temperature: Operation: 0° - 45°C ( 32 - 113°F)

Storage: -25° - +70°C (-13 - 158°F)

Housing: Norly UL94 - V-0

Display: 6 decades, LED, high- efficiency orange, 15 mm (0.59")

Protection class: Front IP65, Rear IP20

Terminal cross section: Signals max. 1.5 mm², AC power max. 2.5 mm²

Output Relays: 2 relays with dry changeover contacts, 250 VAC / 1 A / 250 VA or 100 VDC / 1 A / 100 W

Conformity and Standards: EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3; LV 2006/95/EC: EN 61010-1

DEIX13567-70 – Display

display-deix13567.png

SSI Indicators for Use with Single-Turn or Multi-Turn SSI Encoders

  • Clear LED display (15 mm / 0.59" size) with adjustable brightness
  • Master- or Slave operation with clock rates up to 1 MHz
  • Suitable for all SSI formats from 8 to 32 bits
  • Numerous supplementary functions like Linearization, Bit Blanking etc.

 

DEIX13567: SSI display unit only

DEIX13568: SSI display unit with analogue output

DEIX13569: SSI display unit with two presets and outputs

DEIX13570: SSI display unit with serial interface RS232 and RS485

Technical Specifications

Supply voltage AC: 115/230 V (+/- 12.5 %)

Supply voltage DC: 24 V (17 - 30 V)

Consumption (without sensor): 17 V: 190 mA, 24 V: 150 mA, 30 V: 120 mA

AC Power: 7.5 VA

Aux. output for encoder: 24 VDC, +/- 15%, 120 mA (with AC and DC supply)

Control Inputs: 3 inputs, A, B, C (PNP/NPN/Namur)

Input currents: 5.1 mA / 24 V (Ri = 4,7 kOhm)

Input level HTL: Low: 0 ... 2 V, High: 9 ... 35 V

SSI input frequency range: 100 Hz - 1 MHz

Min. pulse duration for Reset: 5 msec

Analogue output (DEIX13568): 0/4 ... 20 mA (max. 300 ohms), 0...+/-10 V (max. 2 mA)

Resolution: 14 Bits + Sign

Accuracy: 0.1%

Serial interface (DEIX13570): RS 232 / RS 485, 600 to 38 400 bauds

Ambient temperature: Operation: 0° - 45°C ( 32 - 113°F)

Storage: -25° - +70°C (-13 - 158°F)

Housing: Norly UL94 - V-0

Display: 6 decades, LED, high- efficiency orange, 15 mm (0.59")

Protection class: Front IP65, Rear IP20

Terminal cross section: Signals max. 1.5 mm², AC power max. 2.5 mm²

Switching outputs (DEIX13569): PNP, max. 35 volts, max. 150 mA

Conformity and Standards: EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3; LV 2006/95/EC: EN 61010-1

DCFM31482 – Converter

converter-dcfm31482.png

Impulse and Frequency Multiplier for Use with Incremental Encoders and Sensors

  • Universal inputs for incremental encoder signals A, B, Z or A, /A, B, /B, Z, /Z with either TTL level or RS422 format or HTL level
  • Unit to multiply the input impulses with a proportional factor F1 and a reciprocal factor F2, both adjustable in a range of 0.005 to 9.9999
  • Error-free multiplication with accurate impulse count on input and output, therefore no cumulative errors, even not with encoder vibration or frequent change of direction of rotation
  • Frequency range 1 MHz (input and output), programmable index pulse output
  • Serial interface and USB port for communication with remote units and PC

Technical Specifications

Power supply: 11 VDC - 30 VDC

Current consumption: approx. 65 mA with 24 VDC

Aux. output for encoder supply: 5.2 V max. 200 mA

Control inputs Cont.1 - Cont.4: Ri = 3,9 kOhm, LOW < 2,5V, HIGH > 10V

Minimum pulse duration with dynamic function: 50 µsec.

Minimum pulse duration with static signals: 2 msec.

Encoder inputs: RS422 or differential TTL or differential HTL (differential voltage mist always be > 1 V), TTL, LOW < 0.5V, HIGH > 2,5V, HTL (NPN / PNP) Ri = 4,75 k, LOW < 4V / HIGH >10V

Encoder outputs: Push-pull stages 5 - 30 V / 30 mA (short-circuit-proof)

Input frequency: RS422 und TTL differential: 1 MHz, HTL und TTL single-ended: 300 kHz

Serial interface: RS232 / 2400 -38 400 bauds

Ambient temperature: Operation: 0 - 45°C ( 32 - 113°F), Storage: -25 - +70°C (-13 - 158°F)

Housing: Plastic housing for mounting on standard DIN rails 35 mm

Display: LCD with backlight, 2 lines at 16 characters each, 3,5 mm size

Protection class: IP20

Connection terminals: 25 screw terminals, cross section max. 1.5 mm² (0.0023 in²)

Conformity and standards: EMC 89/336/EEC: EN 61000-6-2, EN 61000-6-3; LV73/23/EEC: EN 61010-1

DCDZ31482-89 – Converter

converter-dcdz31482.png

Universal Monitors for Speed, Standstill, Direction of Rotation

  • Compact and most versatile monitor series for control of overspeed, underspeed, standstill and direction of rotation
  • Logical monitoring of remote motion enable signals
  • Universal inputs for connection to incremental encoders (TTL, RS422 or HTL), Proximity switches, photocells remote TTL signals
  • Extremely wide frequency range, operating from 0.1 Hz up to 1 MHz
  • Easy setup by means of four keys and LCD menu
  • All models include serial RS232 interface

Technical Specifications

Power supply: 17 VDC - 30 VDC

Current consumption: approx. 70mA with 24 VDC

Aux. output for encoder supply: 5.2V max. 200mA

Inputs Control 1 / 2: Ri = 3,9 kOhms, LOW < 2,5V, HIGH > 10V

minimum duration of dynamic signals: 50 µsec.

minimum duration of static signals: 2 msec.

Encoder inputs: RS422, differential voltage > 1 V, TTL, LOW < 0.5 V, HIGH > 3 V, HTL (NPN / PNP) Ri = 4,75 k, LOW < 4V / HIGH >10V

Input frequency: RS422 und TTL differential: 1 MHz, HTL und TTL single-ended: 350 kHz

Analogue output (not with DCDZ31489): +/- 10V, max. 2 mA, 0 - 20 mA, 4 - 20 mA (load: max 270 Ohm)

Resolution 14 bits, accuracy 0.1%

Settling time approx. 200us

Step response = 2 x sampling time + 200us

Relays (not with DCDZ31488): Dry change-over contacts, switching capability, 30V / 2A DC or 125V / 0.6A AC or 230V / 0.3A AC

Response time approx. 4 msec.

Serial interface: RS232 / 2400-38400 Bauds

Ambient temperature: Operation: 0 - 45°C ( 32 - 113°F), Storage: -25 - +70°C (-13 - 158°F)

Housing: Plastic housing, suitable for mounting to standard DIN, rails (35 mm)

Display: LCD with backlight, 2 lines at 16 characters, 3,5 mm size

Protection class: IP20

Connections: 25 position screw terminals for cross sections of max. 1.5 mm² (0.0023 in²)

Conformity and Standards: EMC2004/108/EC: EN 61000-6-2, EN 61000-6-3; LV2006/95/EC: EN 61010-1

DKDZ31432 – Converter

converter-dkdz31432.png

Monitor for Direction of Rotation and Standstill

  • Simple and compact unit to monitor forward motion, reverse motion and zero motion
  • Universal impulse inputs for use with all common incremental encoders and sensors (HTL, RS422 or TTL)
  • Two output relays (dry change-over contacts) as well as two fast-responding power transistor outputs
  • Wide input frequency range (up to 500 kHz) and fast response time (<1 msec. with f >1 kHz)

Technical Specifications

Power supply: 17 - 30 V DC

Current consumption: (Aux. output unloaded) ca. 30 mA

Auxiliary output: 5.4 V, max. 200 mA

Maximum input frequency: 500 kHz (RS422 and TTL-differential), 350 kHz (HTL and TTL single-ended)

Impulse inputs: A, /A, B, /B, versatile, for use with RS422 signals, HTL signals (differential, single-ended, PNP, NPN), TTL signals (differential, single-ended, PNP, NPN)

Input levels: RS422: voltage difference >=1 V, HTL: LOW <4 V, HIGH >9 V, TTL: LOW < 0,5 V, HIGH >2,5 V

Input Impedance: NPN and PNP: 4.7 kOhms

Tristate: 10 kOhms

Relays: Dry change-over, switching delay approx. 5 msec.

Switching capability: 30 VDC/2A or 125 VAC/0,6A or 230 VAC/0,3 A

Transistor outputs: High-side driver, switching delay 200 µsec.

Switching voltage: 7 - 30 VDC

Switching current: max. 350 mA

100% short circuit proof (not both outputs at a time for a long period)

Ambient temperature : Operation: 0° - 45°C (32° - 113° F), Storage: , -25° - +70°C (-13° - 158° F)

Weight: approx. 100 g

Conformity and standards: EMC 89/336/EEC: EN 61000-6-2, EN 61000-6-3, LV73/23/EEC: EN 61010-1

DKFU31474 – Converter

converter-dkfu31474.png

Signal Converter Frequency-to-Analogue and Frequency-to-Serial

  • Input frequency range from 0.1 Hz to 1 MHz for full scale analogue output
  • Conversion time only 1 msec. (f > 3 kHz) 
  • Analogue outputs +/- 10 V, 0 - 20 mA and 4 - 20 mA
  • Polarity of analogue signal changes with change of the direction of rotation
  • Suitable for conversion of quadrature signals (A/B) as well as single-channel signals, with all HTL or TTL or RS422 formats and levels
  • Suitable for conversion of the sum, the difference or the ratio of two frequencies
  • RS 232 and RS 485 interfaces for serial readout of the input frequencies
  • Programmable digital filters and programmable linearisation curves
  • Easy to set up by simple TEACH procedure, or by PC operator software

Technical Specifications

Power supply: 18...30 V DC

Current consumption: about 85 mA with 18 V, about 60 mA with 30 V (aux. output unloaded)

Aux. encoder supply: +5.5V +/- 5% (max.: 250mA)

Inputs (RS422/TTL differential): RS422 compatible (differential level min. 1 V) or TTL differential, fmax = 1 MHz

Inputs TTL single-ended: LOW < 0.5V, HIGH > 2.5V, fmax = 200 kHz

Inputs HTL single-ended: LOW < 3V, HIGH > 10V, fmax = 200 kHz, (Ri=4,75 kOhms)

Input "Control": LOW < 3V, HIGH > 10V, min. pulse duration 5 msec.

Analogue outputs: +/- 10V (external load > 5 kOhms), 0-20 mA / 4-20 mA (load < 270 Ohms), Accuracy +/-0.1%

Step width of analogue signals: 1.25mV / 2.5uA

Analogue resolution: 14 bits (+10V / +20mA respectively -10V/ -20mA)

Accuracy of frequency measurement: 0.02 % +/- 1 digit

Response time of the analogue output in normal operation: approx. 1 msec (fin > 10 kHz); 1/fin (fin < 1 kHz) (depending on Sampling Time and frequency)

Zero reset time of analogue signal with sudden input interruption: 5 msec (filter off), 700 msec. (max. filtering)

Temperature range: Operation: 0° ... +45°C (+32 - +113°F)

Storage: -25° - +70°C (-13 - +158 °F)

Weight: approx. 190 g

Conformity and standards: EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3

DKGV31432 – Converter

converter-dkgv31432.png

Cross Switcher and Splitter for Incremental Encoder Signals

  • Universal encoder interface, applicable as level converter, encodersplitter and encoder crossswitch
  • Two encoder inputs A, B, Z and /A, /B, /Z, adjustable to either TTL/RS422 level or to HTL (10-30 volts) level
  • Two signal outputs A, B, Z and /A, /B, /Z, likewise adjustable to either TTL/RS422 or HTL (10-30 volts) level
  • High frequency range (1 MHz)
  • Contactless and bounce-free switch-over between the encoder channels, by remote control signals
  • Power supply 12-30 volts DC, auxiliary output 5 volts for encoder supply

Technical Specifications

Power supply Vin: 12 - 30 Vdc

Power consumption: 50 mA (no-load operation)

Aux. encoder supply output: 5.2 volts and Vin - 2 volts, 2x 125 mA (short-circuit-proof)

Max. frequency: 1 MHz (RS422 or TTL differential), 250 kHz (HTL and TTL single-ended)

Inputs: Single-ended A, B, Z (2x) or differential A, /A, B, /B, Z, /Z (2x), 2 - 30 volts

Outputs: Push-pull A, /A, B, /B, Z, /Z (2x), Level 5 - 30 volts, 30 mA (short-circuit-proof)

Signal propagation delay: approx. 600 nsec.

Temperature range *): Operation: -20° - +60°C (-04° - +140°F)

Storage: -30° - +75°C (-22° - +167°F)

Weight: ca. 100 g

Conformity and standards: EMC 89/336/EEC: EN 61000-6-2 ,EN 61000-6-3; LV73/23/EEC: EN 61010-1

*) Humidity non-condensing

DKGV31682-603 – Converter

converter-dkgv31682-603.png

DKGV31682 / DKGV31682
Impulse Splitters for Incremental Encoders with Potential Separation between Input and Outputs
Splitters with 8 Output Channels Out1 – Out8 

DKGV31602 / DKGV31603
Impulse Splitters for Incremental Encoders with all-around Potential Separation of all Circuits
Splitters with 4 Output Channels Out1 – Out4

Technical Specifications

Power supply: 10 - 30 VDC

Power consumption: (without encoder supply): ca. 40 mA

Aux. encoder supply *): built-in 5.5 V, 200 mA (short-circuit proof)

Max. frequency: TTL (differential) and RS422: 500 kHz (diff. voltage >0,5V), HTL (10 - 30 V): 200 kHz

Input level with HTL single-ended (no inverted signal available): Low: < 4 V, High: > 10 V

Input level "Select" Input: Low: < 4 V, High: > 10 V

Cascading input: A, B, Z, Pegel 5 V( CMOS, Low <0.8 V, High >3.5 V )

Outputs: Push-pull stages 5 - 30 V / 30 mA (short-circuit-proof)

Propagation delay time: 400 nsec.

Mounting: Standard DIN rail

Weight: approx. 400 g

Temperature range **): Operation: -20° - +60°C (-04° - +140°F)

Storage: -30° - +75°C (-22° - +167°F)

Conformity and standards: EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3

*) Please observe galvanic connection to the power supply

**) Humidity non-condensing

DKIP31473 – Converter

converter-dkip31473.png

Universal Signal Converter
SSI – parallel, RS232 – parallel, SSI – RS232

  • Suitable for operation with sensors and encoders using SSI interface
  • Converts SSI data as well asserial data to parallel data format
  • Parallel output 25 bits (push-pull, short-circuit proof)
  • RS232 interface forserial readout of the sensor data
  • SSI: Master or Slave operation
  • Linearization facilities by freely programmable input-output curves
  • Additional facilities like bit-blanking, round-loop-operation etc.
  • 18–30 volts DC power supply

Technical Specifications

Power Supply: 18...30 VDC

Power consumption: approx. 200 mA

SSI Inputs: TTL differential, RS422 standard (1.0 MHz)

SSI Input Format: 13, 21 or 25 Bit, Gray Code or Binary Code

SSI break time: min. 4 clock cycles

Hold input: HTL, PNP-switching, High > 10V , Low < 3V (Ri = 5k)

Parallel outputs: max. 35V at COM+ *), Load 1.2k at 24V + 10% (Ri = 600 Ohm)

Parallel Output Format: Binary / Gray / BCD Code

Temperature-Range: Operation: 0° ... +45°C (+32 - +113°F)

Storage: -25° ? +70°C (-13 - +158 °F)

Weight: approx. 190 g

Conformity and Standards: EMC 89/336/EEC: EN 61000-6-2, EN 61000-6-3; LV73/23/EEC: EN 61010-1

*) Short circuit proof can be guaranteed only up to +27 Volts max.

DKIV31473 – Converter

converter-dkiv31473.png

Signal Converter
SSI – Analogue and SSI – Serial

  • Suitable for operation with allsensors and encoders using SSI interface
  • Scalable analogue outputs +/- 10 volts, 0-20 mA and 4-20 mA proportional to the sensor signal
  • Serial RS232 and RS485 interface for serial readout of the encoder data
  • Easy to set up by Teach function or by PC
  • Linearisation facilities by freely programmable input-output curves
  • Additional facilities as bit-blanking, round-loop-operation etc.
  • 18–30 volts DC power supply, auxiliary voltage output 5 V DC for sensor supply

Technical Specifications

Power Supply: 18...30 VDC

Power consumption: about 170 mA at 18V (+5.5V not connected), about 120 mA at 30V

Inputs (SSI): TTL differential, RS-422 standard (1.0 MHz)

SSI Format: 13, 21 or 25 Bit (Master / Slave / Gray / Bin)

SSI break time: min. 4 clock cycles

Set Input (HTL): High > 10V , Low < 3V (Ri = 5k), Active High; minimum pulse duration 10 msec.

Encoder supply: +5.5V +/- 5% (max. Load: 150 mA)

Analogue outputs: +/- 10V (> 5 kOhm), 0-20 mA / 4-20 mA (<270 Ohms)

Resolution: 14 Bits

Stabilization time: 2 msec.

Accuracy: +/- 0.1%

Temperature-Range: Operation: 0° ... +45°C (+32 - +113°F)

Storage: -25° - +70°C (-13 - +158 °F)

Weight: approx. 190 g

Conformity and Standards: EMC 89/336/EEC: EN 61000-6-2, EN 61000-6-3; LV73/23/EEC: EN 61010-1

DKPU31432 – Converter

converter-dkpu31432.png

Level Converter, Potential Separator and Direction Signal Decoder for Incremental Encoder Signals

  • Signal inputs A, B, Z and /A, /B, /Z, adjustable to either RS422 format or TTL level or HTL (10-30V) level
  • Signal outputs A, B, Z and /A, /B, /Z, likewise adjustable to either RS422 format or TTL level or HTL (10-30V) level
  • Potential separation between input and output
  • Conversion of a A/B quadrature direction signal to a static direction output and vice-versa
  • Encoder connection alternatively via Sub-D-connectors or parallel screw terminal strips

Technical Specifications

Power Supply Vin: 5 - 30 V DC

Current consumption (without load): 50 mA

Max. frequency: 500 kHz (RS422), 300 kHz (HTL)

Input: a) Differential RS422 (A, /A, B, /B, Z, /Z), level 3 ? 30 V (differential voltage min. 1 V), b) Single-ended A, B, Z at HTL level 10 - 30 V (Standard application), c) Single-ended A, B, Z at TTL level 5 V (special application, needs special DIL switch setting)

Output: HTL or TTL, push/pull (A, /A, B, /B, Z, /Z), 5 - 30V, 30 mA

Propagation delay time: approx. 600 ns

Temperature range (°C): Operation: 0° - 45 °C (32 - 113°F)

Storage: -25° - + 75°C (-13 - 158°F)

Weight: approx. 100g

Conformity and standards: EMC 2004/108/EEC: EN 61000-6-2, EN 61000-6-3

DKZU31474 – Converter

converter-dkzu31474.png

Incremental Counter Module With Analogue Output and Serial Interface

  • Counter suitable for quadrature signals (A/B, 90º) as well as single channel inputs
  • Counting inputs selectable to TTL/ RS422 format or to HTL / 10-30 volts format
  • Maximum counting frequency 1 MHz
  • Analogue outputs +/-10 V, 0-20 mA and 4-20 mA, polarity following the sign of the internal counter
  • Analogue conversion time 1 msec only
  • RS 232 and RS 485 interfaces for serial readout of the counter
  • Also suitable for conversion of the sum or the difference of two separate counts
  • Facility for free linearization of the analogue output by 16 interpolation points
  • Easy to set up by TEACH procedure, or by PC and Windows software

Technical Specifications

Power Supply: 18...30 VDC

Power consumption: approx. 85 mA at 18 V

approx. 60 mA at 30 V (+5.5V uncharged)

Encoder supply: +5.5V +/- 5% (max. load: 250mA)

Inputs (RS422/TTL differential): RS422 compatible (differential level min. 1 V) or TTL differential, fmax = 1 MHz

Inputs TTL single-ended: LOW < 0.5V, HIGH > 2.5V, fmax = 200 kHz

Inputs HTL single-ended: LOW < 3V, HIGH > 10V, fmax = 200 kHz, (Ri=4,75 kOhm)

Input "Control": LOW < 3V, HIGH > 10V, min. pulse duration 3 msec.

Analogue outputs: +/- 10 V (> 5 kOhm), 0-20 mA / 4-20 mA (< 270 Ohm)

Step width of analogue outputs: 1.25 mV / 2.5 µA

Analogue resolution: 14 bits (+ 10V / +20mA ... -10V/ -20mA)

Accuracy of analogue output: 0.1% +/- 1 digit

Response time counter => analogue (normal operation): approx. 1 msec

Reset time of the analogue output upon external reset command: 1 msec

Temperature range: Operation: 0° ... +45°C (+32 ... +113°F)

Storage: -25° ? +70°C (-13 ... +158 °F)

Weight: approx. 190 g

Conformity and standards: EMC 2004/108/EC: EN 61000-6-2, EN 61000-6-3

Technically necessary cookies
This site uses third-party website tracking technologies to provide and continually improve their services.
I agree and may revoke or change my consent to privacy at any time with future effect.
more...